Wednesday, May 11, 2011

Flycam 5000 with Comfort Arm + Vest, 80cm Linear Slider (New Arrival)

Hi all,

We would like to introduce 2 more products that we just bring in for DSLR Video Shooter.

1. Flycam 5000 with Comfort Arm + Vest

The Flycam 5000 is a lightweight, hand-held camera stabilization system designed for compact cameras weighing up to 8 pounds. This system works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs.  This amazing stabilization system will provide professional results previously out of reach for low budget video and filmmakers.

The camera platform moves back and forth, and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform you adjust the camera's vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action. 

With the Flycam 5000 you no longer need a tripod or a dolly. All you need is your Imagination!  It is quick and easy to set up and balance. Allows unrestricted Booming and unrestricted 360 degree Panning. Only 15 "tall. Made of precision Aluminum. Can also be used as a Monopod, no-tools telescoping base, with positionable weight discs that allow you to Achieve Dynamic Balance. You can easily attach a small LCD monitor to the base monitor mount hole if needed. Weighs 2.7 pounds without counterbalance disks. 

Flycam 5000 has telescopic post which can be extended. Its height can be adjusted according to the weight of the camera. This system is especially useful for Pro-sumer Video Cameras and video capable DSLR cameras, such as the Canon T2i and 5D Mark II, Panasonic Lumix, Nikon D90, Sony A230L, Olympus E-620 and Pentax-DA.








Price : $669.00 (Flycam5000 only) / $1350.00 (Flycam5000 with Comfort Arm + Vest)


2. 80cm Linear Slider
This is the quietest, smoothest and most versatile camera slider that mobilizes any motion movie camera, video camera, digital camera and any piece of equipment that can be mounted to a standard tripod stand. As you slide the camera across on the slider and take pictures, each picture is seeing the subject at a different angle. This camera slider is ultra compact and convenient, and takes seconds to assemble. It is very easy to re-set your tripod into another positions and start shooting again. 

This camera slider fulfils the purpose of Camera Dolly Systems. It is so versatile and convenient that it completes your video in even a tight space and in little time that no camera dolly can manage.

You can also mount your own Fluid Head onto this Camera Slider to produce more angles and positions to create extraordinary video shoot. Its camera plate is a Universal Plate and accommodates almost all types of cameras. 

You can use only one tripod while using small cameras on this compact Camera Slider, though you must use two tripods while using bigger cameras on it so as  to make the balance of the weight on both sides.

The Camera plate is a Universal Plate and accommodates almost all types of cameras. You can use only one tripod while using small cameras on this compact Camera Slider, though you must use two tripods while using bigger cameras on it so as to make the balance of the weight on both sides.

 Features 
  • 80cm long slider allows gliding effects in your shots all the time with ease.
  • Smooth, effortless travel where accurate camera positioning is required.
  • One or two tripod mounting possible at one time. Different position for tripod mounting on slider is available.
  • Made of Aluminum silver anodizing.
  • Quick and easy to setup.
  • The camera plate on the top of the slider has standard screw makes it compatible for all the cameras.
  • Lightweight cameras can be mounted with one tripod base. Heavy cameras may need two tripod bases.
  • This Camera Slider is very compact and easy to carry.  



















Price : $479.00

Rode Video Mic and F&V Z96 LED Video Light (New Arrival)

Hi all,

As the increasing numbers of Video Recording capable DSLR in the market, we have bring in some accessories for the DSLR Video Shooter needs. Below are 2 of the new products that we just bring in:

1. Rode Video Mic

The RØDE VideoMic is a professional grade shotgun microphone. Based on the latest 'Film industry' technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras.

The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble.

The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output.
  • Studio recording quality
  • Condenser microphone
  • 9V battery powered
  • Integrated shock mounting
  • Two step High-Pass Filter - Flat or 80Hz
  • Three step PAD - 0, -10, -20dB
  • Rugged reinforced ABS construction
  • Windshield included
  • 3.5mm mini-jack output
  • Integrated cold shoe mount, 1/4" and 3/8" thread
Directional Video Condenser Microphone













Price : $249.00


2.F&V Z96 LED Video Light

HDV-Z96 is a flicker free and heat-free light,even produce 800 lux light,it can be adjusted as you need by a rear smooth dimmer(adjusting without flicker).

HDV-Z96 can be powered by AA Batteries or Sony LF570, F770, F970 ,F550,F750 batteries.

The HDV-Z96 produces a 5600k light very clean and natural color. If you need to lower the colortemperature, just simply attach Yellow Warming filter to the front of the light. With White Diffusion filter to soft light, you can add more pieces.

It works with 16:9 format is fit for most DSLR.

The HDV-Z96 can be asembled to multiple units together by using the included link plates.

The package has a MINI ball head that is perfect for mounting on any DSLR camera,very compatible.

Features:
Bulb:  LED
Light Angle: 65 degrees
Luminous Flux: 800Lux
Weight: 188g without battery
Battery: Rechargeable Li-Ion battery or  4*AA Batteries
Colour Temperature: 5600K/3200K
Dimensions: 127mm(L) x 45mm(W) x 75mm(H)

























Price : $169.00

New Sonic Gear Computer Speaker

Hi all,

We would like to introduce 3 new Computer Speaker System by SonicGear.

1. SonicGear Evo3 Platinum 2.1 Multimedia Speaker System

























SPECIFICATION
  • Bass driver: 5” high excursion driver
  • Satellite driver: 2 x 3” full range + 2 x 1” tweeter
  • Control: Bass, master volume, and FX mode.
  • Frequency response: 40Hz – 18KHz
  • Total system power: RMS (8W x 2) + 20W = RMS 36W

FEATURES
  • 3-way audio with cross-over design
  • Drivers and amplifier designed uniquely for Evo 3 Platinum
  • Solid MDF structure for both woofer and satellites
  • Near-zero static noise and distortion

2. SonicGear Evo5 Platinum 2.1 Multimedia Speaker System

























SPECIFICATION
  • Subwoofer : 20 watts RMS
  • Satellite : 2 x 8 watts RMS
  • S/N Ratio : >70dB
  • Frequency Response : 40Hz – 18KHz
  • Bass driver : 5” high excursion driver
  • Satellite driver : 2 x 3” full range driver
  • Satellite driver : 2 x 1” tweeter
  • Voltage : AC 230 ~ 50Hz

FEATURES
  • 3-way audio with cross-over design
  • High power audio with superb clarity
  • Drivers and amplifier designed uniquely for EVO 5 Platinum
  • Solid MDF structure for both woofer and satellite
  • Near-zero static noise and distortion

3. SonicGear Armaggeddon Ultra A7 2.1 Multimedia Speaker System

























 SPECIFICATION
  • Total Power: 85 Watts RMS
  • Subwoofer Power: 55 Watts RMS
  • Satellite Power: 2 x 15 Watts RMS
  • Subwoofer Driver: 6.5" High Excursion Dedicated Ultra Low Bass
  • Satellite Driver: 4 x 2.75" Full Range + 2 x 0.75" Silk-Lined Dome Tweeter
  • Frequency Response: 30Hz - 20KHz
  • S/N Ratio: &rt; 85 dB
  • Distortion: < 1% THD (5 TD 300MA peak to peak source)
  • Sensitivity Input: 350mV
  • Enclosure: 12mm MDF with aluminum front panel
  • Enclosure type: 6TH order bass reflex
  • Power Supply: 120/230Volts AC

Price : 
SonicGear EVO3 Platinum : $59.00
SonicGear EVO5 Platinum : $69.00
SonicGear Armaggeddon Ultra A7 : $159.00